It needs to be emptied regularly to prevent spillage. Your drip tray is most likely overflowing. You will need to remove the bottle, drain the reservoir into a bucket, and call out an engineer to replace the tap. Option 2 – If the above didn’t work, the problem may be the spring or washer in the tap preventing it from closing properly. Option 1 – Check that the tap is tightly screwed on – it may need a slight twist to tighten it in place. Please ensure there is no water in the top of the cooler where the bottle spike is located, if there is water ‘trapped’ here please just run the taps to release the water. Remove the bottle from the cooler and test it with a different bottle. This pressure change draws water into the tank causing it to overflow so that the cooler appears to be leaking.
#Airline tycoon deluxe has stopped working proerly crack
Occasionally a hairline crack can develop in transit which alters the pressure within the cooler – there is normally a vacuum within the cooler. Remove and dry it before testing the water flow again.ĩ9% of the time this is as a result of a leaking bottle, not the cooler itself. The filter is normally a small circular sponge that stops the air filter function (causing the water to flow freely) when wet. Option 2 – If the above doesn’t work, check the water cooler’s air filter on the lid, as well as underneath the lid that the bottle sits on. This has solved the problem on many occasions. Option 1 – Keep the tap open while squeezing the bottle to force the water through. Weak water flow from bottled water cooler If this happens, it’s better to call a technician or to take the unit to your water cooler company for assessment. But if cold water comes out, it’s more likely that the hot tank has blown. Option 5 – If room temperature water is coming out of the hot tap, it’s possible that your hot tank has scaled up and stopped working. Option 4 – If all switches are on but hot water isn’t being heated sufficiently, your dispenser may have faulty wiring. If the problem persists, contact a technician for assistance. Give the water temperature about 5 to 6 hours to adjust before dispensing to see if it worked. Unplug it from the wall and leave for 24 hours before switching it on again. Option 3 – Try “resetting” your cooler by removing several cups of water from both the hot and cold taps and switch off the machine. Option 2 – Check that the switches on the back of the cooler are turned on and illuminated. Also, check that the power cable at the back of the unit is firmly pushed into its socket. Option 1 – Check that your water cooler is plugged in at the wall socket and that the mains power is turned on (a surprisingly common cause). Water Cooler not dispensing hot/cold water (It’s room temperature) Use the headings below to locate your problem or leave a comment if you’re unable to find it. The first step in troubleshooting your water cooler is identifying the problem and figuring out the cause. So we thought it was about time we published a list of common water cooler issues to save you, our valued customers, time. Here at The Water Delivery Company HQ we often get calls from customers seeking water cooler troubleshooting advice.